How to make a bucket hat?

We will teach you how to make a bucket hat as cap manufacturers.

 1. First put the patterned pattern on the fabric, and then one centimeter away from the edge of the seam. This is the seam for releasing the sewing. Cut it out along the edge line. The top of the hat is one piece, the body part is two pieces, and the brim The part is also two pieces, that is, a hat has 5 pieces, and the hat has an inner layer and an outer layer. There are 10 pieces in total. Our hat can be worn on both sides. We choose two kinds of fabrics, one It’s blue velvet, the other is polka dot fabric,

2. After cutting the fabric, use an iron to iron the brim of the hat, that is, the largest curved part. If you want the brim to be harder, we can iron two layers of the brim

3. Then we can start sewing. When sewing, separate the inner and outer layers to sew separately.

4. Put the sewing machine on the black thread, adjust the stitch length to the proper position, and start sewing. First, sew the cap body part, then connect the cap body to the top part, and then sew the brim to the top The upper part of the hat body, so that one side of the hat is sewn, and the polka dot fabric part is also sewn in the same way

5. After sewing the front and back sides in this way, we stitch the edges of the two hats, and leave a piece of it to turn it over.

6. After turning it over, the last piece of fabric is folded in half, then stitched together, ironed the whole hat with an iron, and then pressed on the edge line, and pressed three bright lines on the cornice of the hat to fix it.

7. The made hat is very beautiful, and it is also suitable for wearing on the head. The cornice can cover the eyes and prevent direct sunlight. It also fits the human head very well. It can protect the ears from wind and cold. The front and back effects of the hat As shown in the picture below, you can wear it on the front or on the reverse.