Baby bottle sterilizer

Boiled baby bottle pacifier sterilizer

The principle of the traditional sterilization method is to boil water to 100°C and sterilize the baby bottle through high temperature. This disinfection method is suitable for disinfecting utensils with high temperature resistance above 120°C. The equipped baby bottle storage basket can hold about 6 baby bottles.

How to use: First put the cleaned baby bottle in a storage basket, put it into the pot, and then pour water that is below the height of the baby bottle into the pot and cover it. Put the bottle sterilizer on the gas stove or induction cooker and boil for 10 minutes.

Steam baby bottle sterilizer

High temperature steam sterilization at 100℃ is the most widely used method with the most thorough and effective disinfection effect. This method is adopted in the national tableware disinfection standard. The disinfection standard of medical equipment increases the pressure of the disinfection environment on the basis of the tableware disinfection standard. And temperature. This type of sterilizer has no strict requirements on the structure and light transmittance of the equipment to be sterilized, and is especially suitable for sterilizing children's milk bottles and tableware. In addition, the high-temperature water vapor can dissolve and peel off the unwashed milk scale in the bottle. This type of sterilizer usually has a water-dry automatic shutdown function. Since only about 100ml of water needs to be heated, it saves water and electricity. According to the national tableware disinfection standard GB14934-94, the disinfection time must be more than 10 minutes. This parameter should be considered when purchasing such products. The evaporating dish is an open stainless steel electric heating plate structure, which is easy to clean the scale and will not rust, perforate and leak water.

This kind of product is usually equipped with a baby bottle storage basket, which can hold about 6 baby bottles, and has a small storage basket. Some products are equipped with tableware for blue, which can sterilize children's tableware.

Drying bottle sterilizer

The milk bottle sterilized by steam sterilization method will have a lot of water droplets attached to the wall of the milk bottle. The humid environment can easily cause bacteria to multiply. In order to improve the cleaning time of the milk bottle, this kind of product adds a drying function to the ordinary steam milk bottle sterilizer. , Which is often referred to as a baby bottle sterilizer with drying function. This kind of milk bottle sterilizer is divided into two types according to its drying method: the air extraction type, which needs to draw in air from the outside to blow dry the milk bottle; the non-exhaust type, which uses the internal thermal vortex, does not need to draw in external air. The air extraction type has strict requirements on the air environment, and the air inlet duct and fan blades of the sterilizer must be cleaned regularly, otherwise it will cause secondary pollution to the baby bottle. The non-exhaust type has no requirements on the air environment, and is relatively simple to maintain. It usually has a regular sterilization function.

How to use: First pour about 100ml of water into the evaporating dish, put the washed baby bottle upside down into the baby bottle storage basket, put the nipple and baby bottle cap into the small storage compartment, and close the lid. Turn on the power and press the disinfection button. This type of product is generally equipped with a disinfection and drying button to automatically complete the disinfection and drying procedures.

Microwave milk bottle sterilizer

In essence, it is a plastic utensil for feeding bottles, which does not have the function of disinfection, and is also called a bottle sterilization box. Its working principle is to use the microwave generated by a microwave oven to heat the water in the sterilization box of the baby bottle to turn it into high-temperature steam to sterilize the baby bottle in the sterilization box. This type of sterilizer is suitable for feeding bottles and non-metallic tableware whose height is less than 10cm. Manufacturers of microwave oven sterilizers generally sell baby bottles and sterilizers together.

How to use: First pour 200ml of water into the baby bottle sterilization box, put the washed baby bottle into it, close the lid, and then put the sterilization box in the center of the microwave tray, turn off the microwave, select the appropriate power, and time for 10 minutes